Parts

The e*thirteen e*spec Race Carbon Crank Arm Set is designed to work with Bosch Gen 4 eBike motors. These carbon crank arms offer a slim Q-factor and smaller overall profile, while keeping e*thirteen's proven crank technology at the forefront. - An 8mm self extractor bolt is built into both arms for easy removal - World-Cup DH-rated layup and construction - Compacted carbon fiber with an additional 3k added to front and rear faces of crank for impact resistance - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 141/148 Boost Hubs, 150/157 Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Designed for ebike: Yes - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount Bosch - BB Included: No

Tub of 25 Grade 25, 1/4" loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 25: - Dura Ace or Campy Record quality - 25 per tub

Tub of 25 Grade 25, 3/16" loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 25: - Dura Ace or Campy Record quality - 25 per tub

4.0mm chainring spacer for the inner chainring position. Machined to close tolerances out of 6061 aluminum. Excellent for improving chain line, or for replacing missing spacers. - Inner Diameter: 8mm - Thickness: 4.0mm - 20 per bag

Tub of 75 Grade 25, 5/32" loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 25: - Dura Ace or Campy Record quality - 75 per tub

Tub of 25 Grade 25, 7/32" loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 25: - Dura Ace or Campy Record quality - 25 per tub

Wheels Manufacturing Angled Spacer Single Speed Conversion Kit is a Shimano- and SRAM-compatible single speed conversion kit with ramped spacers. Additional spacers are included to dial-in chainline. Includes: - (2) - 9mm angled spacers - (6) - 3mm spacers - (2) - 1mm shims - (1) - lockring - (1) - 16t cog Compatible with: - Any 1/2 x 1/8 pitch chain, this includes BMX and Track chains - Any 8 or 9-speed chain * Does not work acceptably with 10 or 11-speed chains

- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes one (1) 1-1/8" x 10mm spacer

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws Note: Wheels Mfg DROPOUT-16 has 14.33 mm between the two holes (center-to-center) and 6.51mm between the two vertical plates.

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt (Long - Bolt Only)

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

- For chain and derailleur alignment - 20 per bag

- High roundness grade 300 balls in a shop dispenser bottle - 1/8-inch, 500/bottle - 7/32-inch, 500/bottle

TruVativ's Howitzer XR Bottom Bracket is built tough for abuse. Sealed, oversize cartridge bearings are used to provide smooth action and extreme durability. For serious downhill-worthy strength, the Howitzer boasts CNC-machined aluminum cups and a chromoly spindle, too.

TruVativ Power Spline Bottom Bracket fits proprietary powerspline design popular as OE spec with many moderate-price TruVativ cranks. • Proprietary spline design popular as OE spec with many moderate-price TruVativ cranks • Crank bolts are included

Trek-compatible seat mast cap Offered in white and black and a variety of lengths and offsets, the mast cap includes hardware compatible with round saddle rails only. 7x10mm carbon rail-compatible hardware sold separately. Key features: - Ultra-light carbon construction - One bolt head design offers easy fore-aft and infinite angle adjustment - Compatible with all Trek road bikes with round seat masts - 175mm and 135mm lengths - 5mm and 20mm offsets - Aluminum clamp

The name says it all: Thomson's Masterpiece Seatpost combines the best materials, exceptional strength, perfect function, light weight and the classic beauty of all Thomson products. All Masterpiece posts are extruded and then painstakingly machined from a single block of ultra-strong 7000-series aluminum, and they all weigh less than 200 grams complete. This means you get a post tough enough for any ride on or off road and at a nice and light weight that will complement your dream bike. What's more, you get Thomson's easy-to-adjust and super reliable 2-bolt seat clamp that makes it a breeze to dial in your perfect seat position from minus 5 degrees to plus 29 degrees.

A must for wet weather conditions, these fenders protect from dirt and water splatter. The Deluxe Fenders are solid and stable so you won't get annoying vibrations or tire rubs from wind or rough roads. The black coloring with gray stripe and rear mud spoiler adds to your trike's sporty look. Compatible with all current TerraTrike models. Not compatible with TerraTrike versions 3.5 and older. - Deluxe front fender set for 20" (406) wheels - Robust design for years of reliable use - Set of two, contains mounting hardware and instructions - Black and silver fenders with black hardware

In foul weather conditions this rear fender protects you from dirt and water splatter and thus the ever common "trike stripe" up the back of your neck and head. The Deluxe Fenders are solid and stable so you won't get annoying vibrations or tire rubs from wind or rough roads. The black coloring with gray stripe and rear mud spoiler adds to your trike's sporty look. Pair with the front fenders for that completely splatter free ride. Compatible with all current TerraTrike models. Not compatible with TerraTrike versions 3.5 and older. - Deluxe rear fender set for 20" (406) wheel - Robust design for years of reliable use - Contains one rear fender, mounting hardware and instructions - Black and silver fender with black hardware

Why sacrifice comfort and performance when a TerraTrike is shared amongst multiple riders? Use the Chain Gobbler 2 to adjust your trikes boom length to the perfect fit within seconds and without tools. This kit includes brackets, chain idlers, quick-release levers, and all other hardware needed. - Easily takes up or pays out chain - Allows for boom adjustment anywhere from large to small - Fits all Rambler and GT models

The TerraTrike Comfort Pedal Conversion Kit is a great safety addition for your trike. Providing a comfortable foot support solution, they also allow for hands free entry. Specifically designed for recumbent trikes they are easily adjustable. - One pair is included in the kit. - Pedals not included - mounts to standard TerraTrike pedals. - One size fits most. - Convert standard pedals to pedals with heel support straps - Securely holds heel of foot when going over bumps - Fits TerraTrike and many other standard pedals - Easy sizing with straps

For riders looking for added lower back support, the customizable Lumbar Support Set can be tuned to anyone's comfort needs. Using three removable foam inserts of varying thickness and shape, the set can be molded to provide support precisely where the rider needs it. To install, select the foam insert pieces desired, wrap in the included breathable mesh cover, and place the support between the mesh and adjustment straps of the seat. - Lumbar support for all TerraTrike seats - 3 piece set for multiple configurations depending upon needs/desires - Different foam densities; use one, two or three - Stack them in different order to achieve desired feel - Open cell design does not absorb moisture - Black mesh holds foam pieces together

The Seat Extender will allow for taller customers to now enjoy any TerraTrike that features the two-position fixed seat mount. - Heavy duty chromoly construction - Durable black powder coated finish - Use of the Seat Extender limits the weight capacity of any TerraTrike to 320 lbs. - Use of the Seat Extender will slightly reduce the foldability of the Traveler and may cause damage to the paint and frame.

This side bolstered seat mesh fits "standard" TerraTrike seat frames as well as Rover models. The breathable mesh wicks moisture and maintains comfort and the adjustable straps can be used to dial in comfort. - OEM replacement/upgrade part

The TerraTrike Seat Wedge Cushion may seem simple, but packs a big punch in the comfort category by creating a more "bucketed" feel to the lower seat. This is great for those that are in a very upright position, reducing any forward shift. It can also be used in the top of the seat for those hard-pedaling reclined riders that need help staying down in the seat. - Seat Wedge provides added support - Put it at the front edge for more of a "bucket seat" feel - Put it at the top for added support in the shoulder blade area - Or use it in both places - Closed cell foam easily slides into place - Gray