Sun Seeker Eco-Tad SX Tadpole - 2017

Sun Seeker Eco-Tad SX Tadpole
  • Color: Gloss Black / Bright Blue
  • Color: Gloss Black / Bright Blue
  • Color: Gloss Black / Bright Red
  • Color: Gloss Black / Bright Red
  • Color: Navy Blue / Gloss Grey
  • Color: Navy Blue / Gloss Grey
$929.99
Please select options

Details

The Eco-Tad SX is not only affordable, but also full of great features. The steel frame is strong and compliant for shock absorbency over rough roads, it sports smooth-rolling aluminum wheels with durable Kenda tires, and features reliable Promax brakes. It has a fully adjustable mesh-back saddle with a padded bottom that keeps you cool and comfortable on long outings. There are spare bottle mounts on the seat frame to let you carry plenty of hydration for the long hauls.

- X-Seam range: 31 – 53 inches

X-seam measurement diagram

The perfect recumbent starts by measuring which bike best fits your body and needs. The following information is provided to help guide on measuring your X-Seam. For more detailed information and to learn how to make the necessary recumbent bicycle adjustments, please refer to your Sun Seeker Owner’s Manual or visit your authorized Sun Seeker bike dealer.

Supplies Needed:
You will need a tape measure and a board that is approximately 30" to 48” long (an
ironing board will work).

Measure:

1. Place one end of the board on the floor, then put the entire board flush against any wall.

2. Pull the bottom of the board 14 to 16” out away from the wall. This should simulate a comfortable reclined
position similar to what you would have when driving a car.
3. Pull your butt tightly against the bottom of the board (by holding the board steady in its position with your
hands, while gently scooting your butt against the board).
4. Extend your legs straight out (no bending of the knees), and point your toes straight up towards the ceiling. (It will be necessary to remove your shoes for this step.)
5. Now take the measurement from the base of the reclined board to the bottom of your shoeless heel.

VIOLA! You now have your “X-Seam” measurement, which will determine if you will fit your desired SUN SEEKER model recumbent.

Hint #1 – You can place a book at the base of your heel before you have straightened out your legs, then once your legs are straight, you can get up and make take the measurement from the board’s base to the point that your heel left the book.

Hint #2 – You may want to repeat the measuring process from start to finish, to insure that your “X-Seam” measurement is correct, if only for peace of mind.

Specs

Frame High Tensile Tig Welded Steel
Fork High Tensile Steel
Headset Sealed Mechanism Steel
Rims/Wheels 20×1.50 36h Alloy
Hubs Front: Alloy Tadpole
Rear: Alloy Q/R
Spokes 14g. Stainless Steel
Tires 20×1.50 Kenda Kwest
Crankset Single Alloy 170mm
Chainrings 38T
Bottom Bracket Height: 13 3/4" (35cm)
Front Derailleur N/A
Rear Derailleur Sunrace
Cassette/Rear Cogs 13-32, 7Speed
Shifters Sunrace
Handlebars Steel w/ Bottle Braze-ons
Stem N/A
Brake Levers Promax Locking Linear Pull
Brakes Front: Promax Mechanical Disk
Pedals Alloy Cage
Saddle Steel Frame 1pc – Padded/Mesh w/ Bottle Braze-ons

Part Numbers

Option UPC MPN
Gloss Black / Bright Blue 888571007839 670101
Gloss Black / Bright Red 888571007846 670102
Navy Blue / Gloss Grey 888571007853 670103

Reviews

Read 0 Reviews

Write a Review

REVIEW SNAPSHOT®

by PowerReviews